The VOPV-12 High-volume air sampler is intended for air sampling of very high volumes allowing for a follow-up air contamination measurement. It is utilised for the sampling and evaluation of radioactive aerosols, particulates, etc. in the contaminated air.
The VOPV-10 high-volume air sampler is intended for air sampling of very high volumes allowing for follow-up contamination measurement. It is typically utilised for the sampling and evaluation of radioactive aerosols, particulates, etc. in the contaminated air.
The VOPV-7 high-volume sampler is intended for air sampling of very high volumes allowing for follow-up contamination measurement. It is often utilised for the sampling and evaluation of radioactive aerosols, dust, etc. in the contaminated air.
Equipment of the ”V3H14C” family are designed for H-3 and C-14 sampling from the air. Several versions are produced, ranging from a compact model for the sampling of tritium in the form of water, to a version enabling differential sampling of both the oxidised and unoxidised form of tritium, and the organic and inorganic form of C-14.
The BOA-80 sampler is intended for aerosol sampling from the air for pollution measurements, typically radioactive contamination. The flow rate of the air being sampled can be constant or proportional to the flow rate in the ventilation line.
OTK-01 product series represents the tritium sampler that uses the condensation method, and that does not require an absorption medium. It is used for the gaseous discharges monitoring in nuclear facilities.
The NGS-2000 Noble Gas Sampler is intended for collecting air samples from ventilation stacks of nuclear facilities. Subsequently, the noble gases specific activity of collected sample is evaluated in the laboratory by using spectrometric HPGe detector.
Gaseous Effluent Sampler is intended for accident and post-accident ventilation stack air sampling for further evaluation of radioactive aerosols and iodine discharges. Two shielded chambers ensure continuous sampling during high activity event.
The DJ-500 desorption unit is used for tritiated water desorption which is trapped in Silica gel or another sorbent. This allows follow-up analysis of the liquid sample in the laboratory using liquid scintillation counting method.
#VF